Shelly Pro Dimmer 0/1-10V PM

Shelly Pro Dimmer 0/1-10V PM is a smart DIN-mountable dim controller that allows you to control dimmable drivers remotely via a mobile phone, tablet, PC, or home automation system. The device can operate independently within a local Wi-Fi network, but it can also be controlled via cloud home automation services. It is a current source controller and supports both 0-10V and 1-10V types of drivers.
Features

• DIN-rail mounting
• Energy metering
• Bluetooth connectivity
• BLE gateway: Facilitates communication between BLE and Wi-Fi devices.
• Wi-Fi
• Wi-Fi Range Extender
• Ethernet connectivity
• Scripting: Ability to create automation scenarios via scripts.
• Advanced scheduling: Supports detailed schedules and routines throughout the year, with extensive time adjustments from seconds to months, including brightness settings, transition duration, and the flip value of the dim signal.
• Auto on/off timers
• Webhooks: Supports automation through lightweight, event-driven communication with other devices.
• Compatibility: Highly compatible with third-party home automation systems, including KNX.
• No hub required
• KVS (Key-value storage)
• Virtual and BTHome components: A special set of components that are not initially present in the device and can be dynamically created by the user.
• Diverse driver integration: Supports 0-10V and 1-10V drivers (lights, motors, valves, etc.).
• Night mode: Sets a specific brightness for lights during the night.
• Switch/button input mode: Flexible control inputs through switches and/or buttons:
• Single-button dim control
• Dual-button dim control
• Minimum power-on brightness: Sets brightness to 3% (default value) when powered on if the current brightness is lower than the ‘minimum power-on brightness’. This does not apply if a custom transition is set in schedules or actions.
• Min/max brightness: Refines the range of the dim signal for more precise brightness control at the output.
• Button fade rate: Controls how quickly the output brightness changes when the button(s) are held down. The default value is 3x.
• Button presets: State applied during a double-click event. The default value is 100%.

Manual