| Battery type | CR2477 |
|---|---|
| Operating temperature | -10…60 °C |
| Wireless protocol | Zigbee 3.0 |
| IP rating | IP67 |
| Matter | No |
SONOFF Zigbee Water Leak Sensor with WLDC200 cable
23.50 €
Set of the SONOFF Zigbee water leak sensor SNZB-05P (IP67) with a 2 m WLDC200 leak cable. Can be extended in series, with push notifications and a gateway alarm.
- Connectivity: Zigbee
- Power: battery CR2477
- Protection rating: IP67
- Operating temperature: -10…60 °C
The SONOFF SNZB-05PC is the set of the SNZB-05P Zigbee water leakage sensor with the water leakage cable WLDC200 of 2 meters. The cable records water along a line instead of just at one point, conveniently behind a boiler, under a washing machine or along a pipe.
Multiple WLDC200 cables can be connected in series without length limitation, and a wet cable can be reused after full drying. It is recommended to have an ambient humidity of 0,780 % RH without condensation; very humid spaces can be regarded as water. When detected, the sensor sends a push message and can start an alarm on the gateway via a scene, even without Wi-Fi. The sensor is IP67 and works with Zigbee 3.0 hubs such as NSPanel Pro, iHost and ZB Bridge variants. The SNZB-05P is available without cable.
Features
- Model: SNZB-05PC
- Application: Zigbee water leakage sensor
- Protocol: Zigbee 3.0 (IEEE 802.15.4)
- Protection level: IP67
- Set: SNZB-05P sensor + water leakage cable WLDC200 of 2 m
- Battery: CR2477 (3 V), up to 5 years in 50 reports per day according to manufacturer
- Dimensions: 48 × 48 × 21,6 mm; 34,3 g (without battery)
A Zigbee gateway is needed. For indoor use only.





Reviews
There are no reviews yet.