| Actuators | Switch |
|---|---|
| Wireless protocol | Zigbee 3.0 |
| Matter | No |
| Mounting method | In-wall |
| Power source | 100–240 V AC, 50/60 Hz |
SONOFF ZBMINI-L2-E Zigbee Smart Switch (No Neutral)
20.50 €
SONOFF Zigbee 3.0 wall switch (86 × 86 mm) for one lighting group up to 6 A, no neutral wire. Complete version of the ZBMINIL2 module
The SONOFF ZBMINI-L2-E (ZBMINIL2-E, Orb-ZBW1L from the Fusion series) is a Zigbee 3.0 wall switch for one lighting group that works without a neutral wire. It uses the same switching technology as the ZBMINIL2 module, but as a complete 86 × 86 mm wall switch with a control front, instead of a separate module behind an existing switch.
The switch works with a Zigbee gateway for schedules, countdown functions and scenes, and switches up to 6 A at 100–240 V AC (resistive load up to 1440 W). For LED lighting the maximum is 300 W at 240 V, with a minimum load of 3 W and without a separate anti-flicker module. It is a Zigbee end device and therefore not a router; separate routers are needed to extend the mesh.
Features
- Model: ZBMINIL2-E (Orb-ZBW1L, Fusion)
- Use: switching lighting without a neutral wire
- Supply: 100–240 V AC, 50/60 Hz
- Load: max. 6 A, resistive load 1440 W; LED 300 W at 240 V, minimum 3 W
- Protocol: Zigbee 3.0, end device (not a router)
- Control: Zigbee gateway, schedules and scenes
- Mounting: wall switch, 86 × 86 mm
- Dimensions: 86 × 86 × 35.8 mm; 80 g
- Wiring: 16–14 AWG, solid or stranded copper wire
Have the mains installation done by a qualified installer, with a 6 A circuit breaker or RCBO in front of the switch. Do not connect an anti-flicker module. A Zigbee 3.0 gateway is required.











Reviews
There are no reviews yet.