| Actuators | Shutter and curtain control |
|---|---|
| Wireless protocol | Zigbee 3.0 |
| Matter | No |
| Maximum load | 1 A |
| Mounting method | In-wall |
| Power supply | 100–240 V AC, 50/60 Hz |
SONOFF MINI-ZBRBS-E Zigbee Roller Shutter Switch
20.50 €
SONOFF Zigbee 3.0 roller-shutter switch as an 86 × 86 mm wall switch, for motors up to 1 A, with position in percent and router function.
The SONOFF MINI-ZBRBS-E (Orb-ZBRBS from the Fusion series) is a Zigbee 3.0 roller shutter switch in the form of a complete wall switch of 86 × 86 mm. It controls one shutter, screen or blind motor up to 1 A and replaces the existing wall control, instead of sitting behind the switch as a separate module like the MINI-ZBRBS.
Via a Zigbee gateway, you set the position as a percentage, you create time frame and scenes and turn the direction of rotation without rewire. The switch also works as a Zigbee router and thus strengthens the mesh. There are two limitations: the engine must not run in the same direction for more than 2 minutes in a row (after which the device stops automatically) and multiple engines parallel to one switch are not supported. If automatic calibration fails, for example with a very small engine, switch to manual calibration.
Features
- Model: MINI-ZBRBS-E (Orb-ZBRBS, Fusion)
- Application: Sending shutter, screen or blind motor
- Power supply: 100.0.240 V AC, 50/60 Hz, neutral wire required
- Load: motor max. 1 A
- Protocol: Zigbee 3.0, also as Zigbee router
- Control: Zigbee-gateway: percentage position, time schedule dynamometers, reverse direction
- Mounting: wall switch for EU boxes (Ø 60 mm) and 86 boxes
- Dimensions: 86 × 86 × 34 mm; 84.1 g
- Working temperature: −10… 40 °C
A neutral wire is required. Have the installation run on mains voltage by a qualified installer, with a pre-protection that fits the engine. A Zigbee 3.0 gateway is needed.






Reviews
There are no reviews yet.