| Actuators | Dimmer |
|---|---|
| Wireless protocol | Matter over Wi-Fi 2.4 GHz |
| Matter | Yes |
| Mounting method | In-wall |
| Power supply | 220–240 V AC, 50 Hz |
SONOFF MINI-DIM-E Smart Dimmer Switch
30.50 €
SONOFF Matter-over-Wi-Fi dimmer as an 86 × 86 mm wall switch, for dimmable LED, incandescent and halogen lamps, with power measurement and calibration.
Pay in three equal instalments 3 x 10.17€
The SONOFF MINI-DIM-E (Orb-DIM from the Fusion series) is a Matter-over-Wi-Fi dimmer in the form of a complete wall switch of 86 × 86 mm. Unlike the MINI-DIM installation module, this version replaces the existing wall control and has its own control front.
The dimmer controls dimmable LED lights, glowing and halogen lamps and dimmable electronic transformers in steps of 1%. Dimming with trailing edge and leading edge; the leading edge mode is only intended for older luminaires under 100 W, such as glowing and halogen lamps. With automatic and manual calibration, you tune the dim range to the lamp, limiting flickering and dimming step by step. The load is 400 W resistance load or 200 VA LED. Overflow, overflow and overheating devices switch off in case of a deviation. Not suitable for fluorescent lamps, energy-saving lamps, LED strips or inductive loads such as motors and fans.
Features
- Model: MINI-DIM-E (Orb-DIM, Fusion)
- Application: Dimming dimmable LED, glowing and halogen lamps
- Power supply: 220.0240 V AC, 50 Hz, neutral wire required
- Load: resistance load max. 400 W; LED 200 VA
- Protocol: Matter on Wi-Fi (2.4 GHz, IEEE 802.11 b/g/n)
- Functions: power measurement, 1 % steps, automatic and manual calibration
- Security: overload, flooding and overheating
- Assembly: wall switch, 86 × 86 mm
- Dimensions: 86 × 86 × 33.7 mm; 83 g
- Working temperature: −10… 40 °C
The dimmer operates only at 220.0240 V AC and requires a neutral wire. Have the installation run on mains voltage by a qualified installer. A Matter controller is needed to connect to Matter platforms.






Reviews
There are no reviews yet.