| Actuators | Switch |
|---|---|
| Operating temperature | 0…35 °C |
| Communication & Protocol | Z-Wave |
| In accordance with directives | RoHS 2011/65/EU, RED 2014/53/EU |
| Wireless protocol | Z-Wave 800 (800 series chip) |
| Maximum load | 16 A |
| Transmit power | +6 dBm |
Nice HighLoad-Control
65.00 €
Compact Z-Wave 800 switching module for a single load up to 16 A, with thermostat modes
- Connectivity: Z-Wave
- Operating temperature: 0…35 °C
- Switches one resistive load up to 16 A / 3680 W at 230 V
- Works with push buttons and rocker switches
Pay in three equal instalments 3 x 21.67€
The Nice HighLoad-Control is a compact in-wall module for switching a single electrical load up to 16 A (3680 W at 230 V). It is designed for resistive loads such as electric floor heating, electric radiators and electric boilers. It can be controlled via the Z-Wave network or a connected push button or rocker switch.
Besides switching, the HighLoad-Control offers two thermostat modes. With an external NTC temperature sensor the module regulates heating based on the measured temperature, or the temperature can be controlled through the Z-Wave controller while the NTC sensor monitors the floor temperature. The same module can therefore switch electrical appliances and control electric heating.
The module has a Z-Wave 800 chip and measures the active power and energy consumption of the connected device, as well as the mains voltage. It works with Nice and FIBARO gateways, including the Home Center 3 and Home Center 3 Lite.
Features
- Switches one resistive load up to 16 A / 3680 W at 230 V
- Three operating modes: switch, thermostat with NTC sensor, and thermostat with temperature control via the Z-Wave controller
- Suitable for electric floor heating, electric radiators and electric boilers, among others
- Measures active power (W), energy consumption (kWh) and mains voltage (V)
- Z-Wave 800 with S2 security and repeater function
- Works with push buttons and rocker switches
- Adjustable automatic switch-off timer in switch mode
- Built-in overload and overheating protection
- Compact size of 45 × 36 × 23 mm for installation in a flush-mounting box
- Requires a phase and neutral wire
Please note: the thermostat functions require an external NTC temperature sensor and integration into a Z-Wave network. The NTC sensor is not included. Mains voltage reporting is disabled by default and can be enabled in the settings.








Reviews
There are no reviews yet.