| Battery type | CR2477 |
|---|---|
| Operating temperature | -10…60 °C |
| Wireless protocol | Zigbee 3.0 |
| IP rating | IP67 |
| Matter | No |
SONOFF Zigbee Water Leak Sensor
20.50 €
SONOFF Zigbee 3.0 water leak sensor (IP67) that reports water from 0.5 mm, with push notifications, a gateway alarm and a connector for a leak cable.
- Connectivity: Zigbee
- Power: battery CR2477
- Protection rating: IP67
- Operating temperature: -10…60 °C
The SONOFF SNZB-05P is a Zigbee 3.0 sensor reporting water leakage. An elevated measuring pin detects water from 0.5 mm and also works reliably on metal substrates; the housing is IP67.
When detected, the sensor directly sends a push message and can activate an alarm on the gateway via a scene, even if the Wi-Fi fails. You place it on the floor, for example by a boiler, bath, kitchen, basement or attic. For larger or narrow spots, a water leak cable can be connected, which can be extended in series without length limitation. The sensor works with Zigbee 3.0 hubs such as NSPanel Pro, iHost, the ZB Bridge variants and SmartThings Hub V3, and with Home Assistant via ZHA or Zigbee2MQTT. This version is the sensor without cable; the SNZB-05PC is supplied with cable.
Features
- Model: SNZB-05P
- Application: Zigbee water leakage sensor
- Protocol: Zigbee 3.0 (IEEE 802.15.4)
- Protection level: IP67
- Range: detection from 0.5 mm water; range 130 m (open space)
- Battery: CR2477 (3 V), up to 5 years in 50 reports per day according to manufacturer
- Dimensions: 48 × 48 × 21,6 mm; 34,3 g (without battery)
A Zigbee gateway is required. The sensor is suitable for indoor use.




Reviews
There are no reviews yet.