| Operating temperature | 0…50 °C |
|---|---|
| Wireless protocol | Zigbee 3.0 |
| Colour | White |
| Matter | No |
| Mounting method | In-wall |
| Power supply | 100–240 V AC, 50/60 Hz |
SONOFF Thermostat Core Zigbee Smart Thermostat
41.00 €
SONOFF Thermostat Core: Zigbee 3.0 thermostat, 86 × 86 mm, 3 A relay output and a potential-free boiler contact, 3 weekly programmes, presence detection.
- Connectivity: Zigbee
- Power: 100–240 V AC
- Operating temperature: 0…50 °C
Pay in three equal instalments 3 x 13.67€
The SONOFF TP-WGZBA (Thermostat Core) is a Zigbee 3.0 chamber thermostat in built-in format 86 × 86 mm for water heating. It has two outputs: an active relay output up to 3 A for floor heating actuators and a potential free contact (COM, NO) for switching on a boiler.
There are three weekly programmes of fertilizers with up to 12 temperature periods per day each, which are to switch. The control comes with a rotary knob; a built-in radar recognizes presence (distance in three steps) and turns the display on or off. An external Zigbee temperature sensor from the SNZB-02 series on the same gateway can deliver actual room temperature, and a door/window sensor (SNZB-04 series) activates antifreeze mode in an open window. Security: child lock, antifreeze and overheating protection with an external NTC sensor (10 kΩ, B 3950 K, not included). Trends in target and actual temperature will remain available for up to 6 months. Zigbee2MQTT must be version 2.14.0 or higher.
Features
- Model: TP-WGZBA (Thermostat Core)
- Application: Room thermostat for water heating: control of floor heaters or boiler
- Power supply: 100–240 V AC, 50/60 Hz
- Load: active relay output max. 3 A (resistive load) and potential free contact (COM, NO) for boiler control
- Protocol: Zigbee 3.0, IEEE 802.15.4
- Controls: rotary knob; range of settings 5.1.330 °C; 3 week programmes with up to 12 time periods per day; child lock, antifreeze
- Detection: presence detection (radar): approx. 0.3 / 0.6 / 1 m; window open detection via Zigbee door/window sensor
- Connection: optional external NTC floor sensor 10 kΩ, B 3950 K (not included); wire 0.2.
- Mounting: installation; mounting depth 31,5 mm; screw spacing 60 mm
- Dimensions: 86 × 86 × 45,5 mm; 155 g
- Housing: PC, white
- Working temperature: 0… 50 °C, ≤ 90 % RH non-condensing
According to SONOFF, the output of up to 3 A is not suitable for direct connection of electric floor heating. Always switch off the mains voltage for installation, maintenance or wiring and have the work done by a qualified installer. A Zigbee hub is required.








Reviews
There are no reviews yet.