| Operating temperature | -10…60 °C |
|---|---|
| Wireless protocol | Wi-Fi, Zigbee 3.0 |
| Controllers and bridges | Other controllers & bridges |
| Matter | No |
| Ports | RJ-45, USB-C |
SONOFF Dongle Max Zigbee/Thread PoE Dongle
44.00 €
SONOFF Dongle Max: Zigbee 3.0/Thread dongle with EFR32MG24, PoE, Wi-Fi and USB-C, web console and 5 dBi antennas. For Home Assistant and Zigbee2MQTT.
Pay in three equal instalments 3 x 14.67€
The SONOFF Dongle-M (Dongle Max) is a Zigbee/Thread dongle based on EFR32MG24 and ESP32 that connect Zigbee devices to open-source platforms such as Home Assistant and Zigbee2MQTT. It works via Ethernet with PoE, via Wi-Fi or via USB-C, so that the installation is not tied to the server’s USB port.
The local webconsole in the network shows its status, settings and logs and converts or updates the firmware, without disassembly or manual flashing: as Zigbee coordinator, Zigbee router or Thread RCP. Webhooks for backups and network loss notifications, MQTT for Home Assistant and remote access via WireGuard-VPN are also available. The dongle works with USB and TCP connections and has two 5 dBi adjustable antennas for 360° coverage. The housing is made of aluminium (according to SONOFF 24 hours salt spray tested) and the product is CE, FCC and RoHS certified.
Features
- Model: Dongle-M (Dongle Max)
- Application: Zigbee coordinator, router or Thread radio for open source platforms, via Ethernet (PoE), Wi-Fi or USB
- Chip: EFR32MG24 + ESP32
- Protocol: Zigbee 3.0; Wi-Fi IEEE 802.11 b/g/n 2.4 GHz; Ethernet (RJ45)
- Power supply: 5 V 1 A via USB-C or 48 V 0,25 A via PoE port
- Control: local webconsole: status, settings, logs, firmware exchange and update; webhooks, MQTT and VPN (WireGuard)
- Range: two 5 dBi adjustable antennas
- Housing: aluminium and pc+abs, dark grey
- Working temperature: -10… 60 °C
- Content: dongle, USB-C-to-USB cable, quick start guide
A Zigbee network has one coordinator; use one integration per dongle (ZHA or Zigbee2MQTT). If the webconsole is not accessible via Dongle-M.local, use the IP address.





Reviews
There are no reviews yet.