| Actuators | Switch |
|---|---|
| Product dimensions | 84 x 66,5 x 18 mm |
| Operating temperature | -15…50 °C |
| Wireless protocol | Zigbee |
| Matter | No |
| Maximum load | 32 A |
| Mounting method | DIN-rail |
| Power supply | 100–240 V AC, 50/60 Hz |
SONOFF Basic DIN Rail Zigbee Smart Switch
20.50 €
1-module-wide SONOFF Zigbee 3.0 DIN-rail switch, up to 32 A, with energy monitoring and double-pole switching. For distribution-board installations.
- Connectivity: Zigbee
- Power: 100–240 V AC
- Operating temperature: -15…50 °C
- Aderdoorscene (officially): 4,7.10.10 mm2 copper
The SONOFF Basic DIN Rail Zigbee Smart Switch (BASIC-ZB1GSP) is a 1-module wide Zigbee 3.0 switch for the group cabinet. You switch one final circuit up to 32 A (officially up to 7680 W) at 100.0240 V AC, 50/60 Hz, and you measure voltage, current, power and energy. According to SONOFF, the contact is double pole: both phase and neutral wire are interrupted. Cross-load limits, time schedule performances and scenes can be set up via a Zigbee 3.0 gateway.
This module is intended for higher power in the distribution board, for example an electric heating group, a boiler or any other powerful 1-phase circuit dynamometer always within the 32 A limit and the applicable installation requirements. The housing is 84 × 66.5 × 18 mm and clicks on a standard DIN-rail. SONOFF recommends copper veins of 4 to 10 mm2. As a powered Zigbee device, the switch can also strengthen the mesh network in the meter cabinet as a Zigbee router. Working temperature: −15 to 50 °C.
Features
- Model: BASIC-ZB1GSP
- Mounting: DIN-rail, 1 module wide (18 mm)
- Power supply/load: 100–240 V AC, 50/60 Hz, 32 A max. ( allotted to 7680 W)
- Switching: double pole (phase and neutral wire), according to SONOFF
- Energy measurement: voltage, current, power and consumption
- Protocol: Zigbee 3.0; also Zigbee router
- Aderdoorscene (officially): 4,7.10.10 mm2 copper
- Dimensions: 84 × 66.5 × 18 mm; working temperature −15 to 50 °C
Allow to be installed in the group cabinet by an authorised installer, with the right pre-security. A Zigbee 3.0 gateway is required; available measurements and security options may vary by gateway.










Reviews
There are no reviews yet.