| Battery type | CR2477 |
|---|---|
| Operating temperature | -20…60 °C |
| Wireless protocol | Zigbee 3.0 |
| Matter | No |
SONOFF AirGuard TH Pressure Zigbee Temperature, Humidity and Air Pressure Sensor
20.50 €
SONOFF Zigbee 3.0 sensor for temperature, humidity and air pressure, with dew point and VPD in the app. ±0.2 °C, ±2% RH, ±0.1 hPa. CR2477 battery included.
- Connectivity: Zigbee
- Power: battery CR2477
- Operating temperature: -20…60 °C
- Model SNZB-02M (AirGuard TH Pressure)
The SONOFF SNZB-02M (AirGuard TH Pressure) is a Zigbee 3.0 sensor that measures temperature, humidity and air pressure. In the eWeLink app, he also calculates the dew point and the VPD, so that five quantities are available in one device.
The accuracy is ±0,2 °C, ±2 % RH and ±0,1 hPa, with a refresh every 5 seconds. You set a comfort rangeassisted for each of the three parameters; if exceeded, a notification will follow in the app. The dew point isassisted to recognise moisture problems in walls early, the VPD for cultivation environments. For example, scenes can switch a fan or dehumidifier, and the history of six months can be seen. The sensor is not waterproof and therefore not intended for outdoor use. A gradient in the air pressure gives general weather indications and is not a weather forecast. With the SNZB-02P you only measure temperature and moisture.
Features
- Model SNZB-02M (AirGuard TH Pressure)
- Application: Zigbee sensor for temperature, humidity and air pressure
- Protocol: Zigbee 3.0 (IEEE 802.15.4)
- Accuracy: ±0,2 °C, ±2 % RH, ±0,1 hPa
- Range: −20… 60 °C; air pressure 700.01100 hPa
- Battery: CR2477 (3 V), supplied; over 2 years according to manufacturer
- Dimensions: 45 × 45 × 17.6 mm; 27.3 g
A installing Zigbee gateway is required. Home Assistant via ZHA requires a script. Forprogramming indoors only.






Reviews
There are no reviews yet.