The Nice CO Alarm-Control is a compact carbon monoxide detector. Thanks to its stylish design, the CO Sensor can be mounted on the wall at the ideal height. Due to its high sensitivity, the sensor detects carbon monoxide (CO) gas at a minimum quantity. An alarm is signaled by the built-in siren, flashing LED and by sending Z-Wave commands.
FeaturesCan be used as a stand-alone carbon monoxide detector without intelligent functionsMounting to the wallBattery poweredCompletely wirelessAcoustic signal and LED indicatorBuilt-in temperature sensor.
Carbon Monoxide Detectors, Heat & CO Detectors, Temperature Sensors
Nice CO Alarm-Control
€102.92
Carbon monoxide detector with Z-Wave
| Acoustic signal | 85 dBA at 3 meters |
|---|---|
| Alarm Response time with standard settings | 50ppm 60-90min 100ppm 10-40min 300ppm |
| Battery included | Yes |
| Battery life | 3 years with standard settings (tested with Panasonic Industrial Lithium) |
| Battery type | CR123A |
| Communicatie & Protocol | Z-Wave |
| Dimensions Product | 65 x 28 mm |
| In accordance with guidelines | RED 2014/53/EU RoHS 2011/65/EU EN 50291-1:2010 |
| Lifetime under typical circumstances | 8 years |
| Measurable carbon monoxide range | 0 – 450 ppm |
| Measurement accuracy | ± 10ppm / ± 5% |
| Operating humidity | 10-95% relative humidity without condensation |
| Operating temperature | 0-50 °C |
| Power source | 3V battery |
| Protocol | Z-Wave , Z-Wave (500 series chip) |
| Radio frequency | 868.0–868.6MHz 869.7–870.0MHz |
| Range | outdoor up to 50m indoors up to 40m (Depending on terrain and building construction) |
| Sensors | Carbon monoxide (CO) |
| Transmit power | -5 dbm |
Reviews
There are no reviews yet.