FIBARO Roller Shutter 4

Reliable design, advanced technology and even better - the new FIBARO Roller Shutter 4!The FIBARO Roller Shutter 4 - equipped with the Z-Wave 800 chip - is a device designed to control roller shutters, awnings, blinds, curtains and pergolas. The roller shutter enables precise positioning of roller shutters or blind slits. The device is equipped with energy monitoring. It enables the control of connected devices either via the Z-Wave network or a directly connected switch. FIBARO focussed on easy installation and an intuitive initial design. There are more inputs for N and L cables, so there is no need to use connection terminals. The shape and dimensions of the device allow easy and quick installation in flush-mounted boxes. The button and diode are easily accessible. Equipped with plug-in connectors, it enables even faster installation - no screwdriver required. Three extra connection cables for connecting the switch are included. The integrated bridge provides a simple bridging option for phase and neutral. It is not necessary to use Wago connectors to connect wires. You save space in the box and reduce installation time thanks to the push-in wire connection. Features:Flush-mounted wireless module for integrating existing installations such as roller blinds, venetian blinds, pergolas, curtains, awnings, blind motors with electronic or mechanical limit switchesinto the Z-Wave networkEquipped with Z-Wave 800 chip to provide better rangeSupports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryptionActive power and energy metering functionalityWorks as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the networkWorks with various types of switches – momentary, toggle and dedicated roller blind switchesEasy and quick too install thanks to push-in wires connector and inbuilt bridgeTo be installed in wall switch boxesPower Supply: 100-240V~50/60HzRated Load Current: 2A for motors with compensated power factor (inductive loads)Supported Motor Type: single-phase AC motorsRequired Limit Switches: electronic or mechanicOperating Temperature: 0°C - 35°CFor Installation in Boxes: Ø = 50mm, depth ≥ 60mmWireless Protocol: Z-Wave (800 series chip)Wireless Signal Power: up to 5dBmWireless Frequency band: 868.4 MHzRange: Up to 100m outdoors, up to 30m indoors (depending on the terrain and building structure)