Dimmers – Nutikodulahendused

Z-Wave to DALI Controller

liisu — Tue, 27 Oct 2026 15:15:37 +0000

Important: The product and module integration is still in the testing phase. The full implementation is planned for early 2023.

The DALI to Z-Wave Controller has been developed for the control of light sources that be compatible with the DALI system.

The module allows you to control one light source or a group of light sources via broadcast mode and single group addressing. The module can switch and dim the light sources.

Thanks to Z-Wave communication, the module can be operated and automated with the FIBARO System. The Z-Wave to DALI Controller can also be operated wirelessly with on/off and dim commands (via associations). For example with the FIBARO Dimmer 2 & FIBARO Switch 2

Features

Support for DT6
Switch and dim DALI light sources via FIBARO
Replaces 2 extra wires with wireless control
Works with DALI single light source or group of light sources
Thanks to Z-Wave communication, the module is easy to add to FIBARO

Shelly Pro Dimmer 1PM

liisu — Tue, 27 Oct 2026 15:15:35 +0000

The Shelly Pro Dimmer 1PM is a DIN rail mountable dimmer. The module supports active energy measurement and is designed for dimming 1 light source. The smart dimmer works with WiFi, LAN and Bluetooth and is therefore compatible with Homey, Smartthings and Home Assistant, among others. Thanks to the WiFi protocol, you can also use it without a hub via the Shelly Smart Home App. You simply place the dimmer in your distribution box on a DIN rail, you can dim 1 light source with a maximum of 200 Watts.
Supported light sources

Light bulb
Dimmable LED and CFL
Dimmable electronic transformers

Features

Open source
ESP32 chip on board
Works stand-alone via LAN or WiFi 2.4 Ghz
Bluetooth for easy pairing
Built-in web server
Access Point and Client Mode
Supported HTTP and/or UDP
Supported mjS scripting
110-240VAC
Maximum 200 watts
Leading edge
Trailing edge
Current measurement
Protected against overload
Protected against overheating
Protected against voltage peaks
Free Android or IOS Shelly Cloud App
Works with MQTT
Easy to install
Built-in distribution box, DIN rail
Scene activation via App

Shelly Pro Dimmer 2PM

liisu — Tue, 27 Oct 2026 15:15:35 +0000

The Shelly Pro Dimmer 2PM is a DIN rail mountable dimmer. The module supports active energy measurement and is designed for dimming 2 light sources. The smart dimmer works with WiFi, LAN and Bluetooth and is therefore compatible with Homey, Smartthings and Home Assistant, among others. Thanks to the WiFi protocol, you can also use it without a hub via the Shelly Smart Home App. You simply place the dimmer in your distribution box on a DIN rail, you can dim 2 light sources with a maximum of 200 Watts per channel.
Supported light sources

Incandescent lamp
Dimmable LED and CFL
Dimmable electronic transformers

Features

Open source
ESP32 chip on board
Works stand-alone via LAN or WiFi 2.4 Ghz
Bluetooth for easy pairing
Built-in web server
Access Point and Client Mode
Supported HTTP and/or UDP
Supported mjS scripting
110-240VAC
Maximum 200 watts per channel
Leading edge
Trailing edge
Current measurement
Protected against overload
Protected against overheating
Protected against voltage peaks
Free Android or IOS Shelly Cloud App
Works with MQTT
Easy to install
Built-in distribution box, DIN rail
Scene activation via App

Shelly Pro RGBWW PM

liisu — Tue, 27 Oct 2026 15:15:34 +0000

The Shelly Pro RGBWW PM is a five-channel smart LED controller for DIN rail mounting. Ideal for controlling RGB and white LED strips in various configurations. With five inputs (push button, switch, or analog signal) and five independently controllable outputs, this device is highly flexible for both residential and commercial applications.
The Shelly Pro RGBWW PM supports four profiles:

RGB + CCT (default)
CCT x 2
RGB + lights x 2
Lights x 5 (independent control of 5 LED groups)

In the Lights x 5 profile, five different LED strips or light groups can be controlled individually – ideal for zones or scenes. In addition, the device includes integrated power metering to monitor voltage, current, and energy usage per channel in real time. The Shelly Pro RGBWW PM works standalone in a local Wi-Fi network but is also fully compatible with cloud-based automation systems. Thanks to the built-in web interface, you can configure, operate, and monitor the device easily – locally or remotely over the internet.
Features:

DIN rail mounting
1DIN width – 19 mm
Power metering per channel
5 independent light channels (for RGB, CCT, or white LED strips)
5 inputs (push button, switch, or analog 0–10V)
Works without a gateway – standalone via Wi-Fi
Built-in web interface (accessible via IP)
Supports LAN (Ethernet), Wi-Fi, and Bluetooth
Supports scripting (Shelly scripting)
Supports MQTT, CoAP, REST API, and Webhooks
Supports KNXnet/IP
Works with Home Assistant, Homey Pro, Google Home, Alexa, and SmartThings
Built-in Wi-Fi range extender & Bluetooth Gateway for Shelly devices
Protected against overheating, overvoltage, and overcurrent
Dimensions: 94 x 19 x 69 mm

Shelly Plus 0-10v Dimmer

liisu — Tue, 27 Oct 2026 15:15:31 +0000

The Shelly Plus Dimmer 0-10V is designed to control 0-10V dimmable drivers wirelessly via WiFi. And the great thing is, you can also use the wall switch.
Switch on/off and dim your lights wirelessly with your smartphone, from anywhere in the world. Easily create smart scenes (scenarios) and set timers in the free App for your home automation. For example, automatically turn on your lights at sunset or automatically dim your lights at night between 11:00 PM and 6:00 AM. Voice control with Siri, Google Assistant or Amazon Alexa is also possible.
Features

Open source, no hub required
Works stand-alone via WiFi 2.4 Ghz
Bluetooth for easy connection to your home WiFi

< li> Built-in web server

Access Point and Client Mode
Supported HTTP and/or UDP
110-240VAC;
Output max. 10VDC and 0.35W
Protected against overheating and overload
Works with MQTT
Works with Google Home or Alexa
Easy to install
Recessed, behind (wall) switch
Works with switch, pulse switch, hotel switch
li>
Pulse switch for dimming
Scene activation via App
ESP32 with 4MB flash/debug chip
Wi-Fi Fi Range Extender & BLE Gateway
Scripting, webhooks, MQTT, WebSocket, HTTPS, UDP, TLS and custom certificates

< div>

Shelly Pro Dimmer 0/1-10V PM

liisu — Tue, 27 Oct 2026 15:15:31 +0000

Shelly Pro Dimmer 0/1-10V PM is a smart DIN-mountable dim controller that allows you to control dimmable drivers remotely via a mobile phone, tablet, PC, or home automation system. The device can operate independently within a local Wi-Fi network, but it can also be controlled via cloud home automation services. It is a current source controller and supports both 0-10V and 1-10V types of drivers.
Features

DIN-rail mounting
Energy metering
Bluetooth connectivity
BLE gateway: Facilitates communication between BLE and Wi-Fi devices.
Wi-Fi
Wi-Fi Range Extender
Ethernet connectivity
Scripting: Ability to create automation scenarios via scripts.
Advanced scheduling: Supports detailed schedules and routines throughout the year, with extensive time adjustments from seconds to months, including brightness settings, transition duration, and the flip value of the dim signal.
Auto on/off timers
Webhooks: Supports automation through lightweight, event-driven communication with other devices.
Compatibility: Highly compatible with third-party home automation systems, including KNX.
No hub required
KVS (Key-value storage)
Virtual and BTHome components: A special set of components that are not initially present in the device and can be dynamically created by the user.
Diverse driver integration: Supports 0-10V and 1-10V drivers (lights, motors, valves, etc.).
Night mode: Sets a specific brightness for lights during the night.
Switch/button input mode: Flexible control inputs through switches and/or buttons:
Single-button dim control
Dual-button dim control
Minimum power-on brightness: Sets brightness to 3% (default value) when powered on if the current brightness is lower than the ‘minimum power-on brightness’. This does not apply if a custom transition is set in schedules or actions.
Min/max brightness: Refines the range of the dim signal for more precise brightness control at the output.
Button fade rate: Controls how quickly the output brightness changes when the button(s) are held down. The default value is 3x.
Button presets: State applied during a double-click event. The default value is 100%.

Manual

Shelly Dimmer 0/1-10V PM Gen3

liisu — Tue, 27 Oct 2026 15:15:00 +0000

The Shelly Dimmer 0/1-10V PM Gen3 (the device) is a smart dimmer controller that allows you to dim drivers remotely via your mobile phone, tablet, PC, or a home automation system. The device can operate independently on a local Wi-Fi network or via cloud-based home automation services. The device is a current sourcing controller and supports both 0-10V and 1-10V drivers.
Features

Bluetooth: The device complies with the Bluetooth standard and can connect with other Bluetooth devices to exchange data over short distances.
BLE Gateway
Wi-Fi
Wi-Fi Range Extender
Scripting
Basic schedules: Supports weekly schedules and routines, including setting brightness, transition duration, and the flip value of the dim signal.
Advanced schedules: Offers detailed schedules and routines for the entire year, with extended time settings from seconds to months, including brightness setting, transition duration, and flip value of the dim signal.
Shelly Plus Add-On compatible
Auto on/off timers
Local actions: Allows you to create automation scenarios within the local Wi-Fi network, including setting brightness, transition duration, and the flip value of the dim signal.
Webhooks: Supports automation through lightweight, event-driven communication with other devices.
Compatibility: Highly compatible with third-party home automation systems.
No hub required: Ready to use both locally and remotely via Shelly Smart Control or third-party systems.
Activity log: Stores a detailed history of events.
KVS (Key-value storage): The KVS service provides basic storage for key-value pairs.
Customizable thresholds and offsets for temperature, humidity, and light when used with the Plus Add-on.
Protection against overcurrent, overvoltage, and overpower.
Power measurement: Accurate monitoring of energy consumption. Information on voltage (V), current (A), and consumption (W) is displayed.
Diverse driver integrations: Supports 0-10V and 1-10V drivers (such as lights, motors, valves, etc.).
Night mode: Allows setting a specific brightness level for the lights during the night.
Power-on brightness: If the night mode brightness is lower than the minimum power-on brightness, the minimum power-on brightness will be applied.
Switch/button input mode: Provides flexible input control via switches and/or buttons.
Single-button dim control
Dual-button dim control
Transition duration: Determines the time for dimming from 0 to 100% when turning on and from 100 to 0% when turning off.
Minimum power-on brightness: Brightness level (in percentage) applied when powered on and the current brightness is lower than the ‘minimum power-on brightness’. Default is 3%. This is not applied when an explicit (custom) transition is defined in schedules and actions.
Min/Max brightness: Limits the range of the dim signal for more accurate brightness control at the output.
Button fade speed: Determines how quickly the output brightness changes when holding the button(s). Default is 3x.
Button presets: State applied upon a double-click event. Default value is 100%.
Virtual components: A special set of components that are not initially present in the device and are dynamically created by the user.

Manual

Shelly Dimmer 2

liisu — Tue, 27 Oct 2026 15:14:49 +0000

With this module you can wirelessly switch and dim your lamps or devices on or off via your smartphone! Your physical wall switch will continue to work as usual. Set up some fun scenes (scenarios) in your smart-home system or use the free app. For example, with this module you can automatically turn on your lights when the sun sets. Or dim your lights a bit in the middle of the night.
Features

Open source
Works stand-alone via WiFi 2.4 Ghz
Built-in web server
Access Point and Client Mode
Supported HTTP and/or UDP
110-240VAC;
0-220W Halogen with blue neutral wire
0-200W LED with blue neutral wire
Min. 10W without blue neutral wire or otherwise with Bypass.

Protected against overheating and overload
Works with MQTT

< li>Works with Google Home or Alexa

Easy to install
Recessed, behind (wall) switch
Works with switch, pulse switch, hotel switch

< li>Pulse switch for dimming

Scene activation via App
ESP8266 with 4MB flash/debug chip
Max. load to be set
No blue neutral wire required for connection

Manual

Shelly Wave Pro 2PM LR

liisu — Tue, 27 Oct 2026 15:14:28 +0000

The Shelly Wave Pro 2PM LR is a professional DIN rail module with two independent relays for switching and measuring power consumption per channel. The module supports a load up to 16 A per channel (total 25 A) and allows accurate power measurement for both circuits separately or combined. Thanks to Z-Wave Long Range, the connection remains stable, even over distances up to 1 km (in open field).
The Shelly Wave Pro 2PM LR is equipped with the latest Z-Wave 800 series chipset, making it energy efficient and future-proof. Thanks to SmartStart inclusion and S2 Authenticated security, installation is easy and safe. Ideal for professional applications that focus on reliability, monitoring and integration.
adjourn

Two independent relays (2 x 16 A, total 25 A)
DIN rail assembly for distribution cabinets
Supports Z-Wave Long Range up to 1 km (line-of-sight)
Double frequency option: 864 MHz (Z-Wave LR) or 868.4 MHz (Z-Wave Plus)
Power measurement per channel and combined
Newest Z-Wave 800 Series Technology
Easy installation with SmartStart
Secure communication via S2 Authenticated (AES-128)
Over-the-air firmware updates
Very low energy consumption (< 0.3 W)

Shelly Wave Pro Dimmer 1PM

liisu — Tue, 27 Oct 2026 15:14:24 +0000

The Shelly Wave Pro Dimmer 1PM is a DIN-rail-mounted dimmer. The module supports active energy measurement and is designed to dim a single light source. The Wave Pro Dimmer 1PM can be operated with 2 switches. The smart dimmer works with Z-Wave, using a Z-Wave 800 chipset, and is compatible with Homey, Home Center 3, and other platforms such as Home Assistant and SmartThings. You can easily install the dimmer in your fuse box on a DIN rail, allowing you to dim one light source with a maximum of 200 watts. Note! The dimmer does not yet have full support on the mentioned platforms. Check the current compatibility via the manual link below.
Based on our own tests on the HC3, it seems possible to add the unit after several attempts, resulting in a usable endpoint. Note that the unit needs to be added in Singlechannel mode (see associations) and corrected. Supported Light Sources Incandescent bulbs Dimmable LED and CFL Dimmable electronic transformers
Features

110-240VAC
Z-Wave 800 chipset
S2 security
Maximum 200 watts (1 channel)
2 switch contacts
Trailing edge
Power measurement
Overload protection
Overheat protection
Surge protection
Fuse box installation, DIN rail
19mm width

Manual